Product Details
ADS1115IDGSR Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 4 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 860 Hz.The input type of this electronic AD converter is Differential, Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to ADS1115 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 2V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 4.096V.The ADC converter operates from 3.3V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 900μW.The conversion rate of this electrical AD converter is calculated as 860 sps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -4.096V.PGA, Selectable Address can be ensured when operating.The digital converter operates with the minimal supply voltage (DC) of 2V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.The maximal supply current amounts to 0.3mA.
ADS1115IDGSR Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2V
3.3V power supplies
Maximal supply voltage (DC) of 5.5V
ADS1115IDGSR Applications
There are a lot of Texas Instruments
ADS1115IDGSR ADC applications.
Cell Phones
Digital Multimeters, PLC's (Programming Logic Controllers)
RADAR processing, digital oscilloscopes
CMOS Image sensors for mobile applications
Medical Instrumentation and medical imaging
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Product Description
ANSC PART# |
ANSC- ADS1115IDGSR |
Part# | ADS1115IDGSR |
Type: | Integrated Circuits(ICs) |
Manufactor | ADI |
DC | new |
Package / Case | 10-VSSOP |
Supplier Device Package | Tape & Reel (TR)Cut Tape (CT) |
Product Attributes
TYPE | DESCRIPTION |
Category | Integrated Circuits (ICs) |
Data Acquisition | |
Analog to Digital Converters (ADC) | |
Mfr | Texas Instruments |
Series | - |
Package | Tape & Reel (TR) |
Cut Tape (CT) | |
- | |
Product Status | Active |
Number of Bits | 16 |
Sampling Rate (Per Second) | 860 |
Number of Inputs | 2, 4 |
Input Type | Differential, Single Ended |
Data Interface | I2C |
Configuration | MUX-PGA-ADC |
Ratio - S/H:ADC | - |
Number of A/D Converters | 1 |
Architecture | Sigma-Delta |
Reference Type | Internal |
Voltage - Supply, Analog | 2V ~ 5.5V |
Voltage - Supply, Digital | 2V ~ 5.5V |
Features | PGA, Selectable Address |
Operating Temperature | -40掳C ~ 125掳C |
Package / Case | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) |
Supplier Device Package | 10-VSSOP |
Mounting Type | Surface Mount |
Base Product Number | ADS1115 |
Actual image of the product
Product datasheet
For more information, please download