Three in one wireless charger PCBA board, ten watt fast charging board, high-power wireless charging and transmitting module

Product Feature: 

1. Input voltage: DC9V1.5-2A. If the voltage exceeds this range, an alarm will be triggered and charging will stop

2. Output voltage: 9V ± 0.1V,

3. Charging current: 1200mAh

4. Charging power: up to 10W compatible with Apple 7.5W

5. Conversion efficiency: greater than 75% with FOD foreign object detection.

6. Transmission distance: maximum 8mm, recommended transmission and reception spacing of 2mm~4mm

7. Standby power consumption: average power consumption less than 50mW

8. Over temperature protection: When the temperature is above 60 ° C during charging, it will automatically stop charging for 1 minute. After the temperature drops, it can be recharged. The normal temperature for 10W fast charging is 40 ° C.

9. Overcurrent protection: Automatically stops charging when the output current exceeds 2A during charging to prevent damage to the charger

10. Execution standard: Qi wireless charging standard

11. Product certification: CE/FCC, compatible with QI certification standards

Description of watch panel functional parameters:

PCBA size: 26 * 26mm

Coil size: 26 * 26mm

Input power: 5 watts

Launch distance: 5-8 mm material

Charging current: 1000mAh

Output power: 5V -1A

Frequency: 110-205 kHz

Efficiency conversion: 76%

Product standard: Qi

Supports 1/2/3/4 generations

Protection measures: overcurrent protection, over temperature protection, short circuit protection

About Application

About customization

Delivery display