Product Overview
As a result of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.5V~42V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the Up to 1MHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. It is inputted with a DC switcher's voltage of 24V. A search for "LM25085" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. Input voltage of dc dc voltage regulator must be 4.5V. Statistically, the DC regulator outputs 42V voltage. It's important to remember that the dc dc regulator's normaloutput current is 1.75A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1MHz. A circuit should contain 42V in order to ensure the voltage regulator dc to dc runs safely and reliably. As long as the dc switching is in a dormant state, it utilizes 1.25mA.
Product Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %
Product Applications
LM25085MYX/NOPB DC to DC converter applications.
· Automation technology
· CMM
· Various precision measuring instruments
· Various precision measuring detectors
· Flaw detection equipment
· Balance equipment
· Industrial robots
· Industrial controllers
· Die casting equipment
· Injection molding machinery
Product Description
Type | Description |
|---|---|
ANSC PART# | ANSC - LM25085MYX/NOPB |
Category | Integrated Circuits (ICs) Power Management (PMIC) DC DC Switching Controllers |
Manufacturer | - |
Series | - |
Packaging | Tape & Reel (TR) Cut Tape (CT) |
Part Status | Active |
Output Type | Transistor Driver |
Function | Step-Down |
Output Configuration | Positive |
Topology | Buck |
Number of Outputs | 1 |
Output Phases | 1 |
