Product Features

High-Performance RISC CPU: 

• Only 49 Instructions to Learn: - All single-cycle instructions except branches 

• Operating Speed: - DC – 32 MHz oscillator/clock input - DC – 125 ns instruction cycle 

• Up to 16K x 14 Words of Flash Program Memory 

• Up to 1024 Bytes of Data Memory (RAM) 

• Interrupt Capability 

• 16-Level Deep Hardware Stack 

• Direct, Indirect and Relative Addressing modes 

• Processor Read Access to Program Memory 

• Pinout Compatible to other 28/40-pin PIC16CXXX and PIC16FXXX Microcontrollers

Special Microcontroller Features: 

• Precision Internal Oscillator: - Factory calibrated to ±1 percent, typical - Software selectable frequency range from 32 MHz to 31 kHz 

• Power-Saving Sleep mode 

• Industrial and Extended Temperature Range 

• Power-on Reset (POR) 

• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) 

• Brown-out Reset (BOR) - Selectable between two trip points - Disable in Sleep option 

• Multiplexed Master Clear with Pull-up/Input Pin 

• Programmable Code Protection 

• High Endurance Flash/EEPROM cell: - 100,000 write Flash endurance - 1,000,000 write EEPROM endurance - Flash/Data EEPROM retention: > 40 years 

• Wide Operating Voltage Range: - 1.8V-5.5V (PIC16F193X) - 1.8V-3.6V (PIC16LF193X)

Low-Power Features: 

• Standby Current: - 100 nA @ 2.0V, typical (PIC16LF193X) 

• Operating Current: - 6.0 μA @ 32 kHz, 2.0V, typical (PIC16LF193X) - 54 μA @ 1 MHz, 2.0V, typical (PIC16LF193X) 

• Low-Power Watchdog Timer Current: - 1.0 μA @ 2.0V, typical (PIC16LF193X)

Peripheral Features: 

• Up to 35 I/O Pins and 1 Input-only pin: - High-current source/sink for direct LED drive - Individually programmable Interrupt-on-pin change pins - Individually programmable weak pull-ups 

• A/D Converter: - 10-bit resolution and up to 14 channels - Can operate during Sleep - Selectable 1.024/2.048/4.096V voltage reference 

• Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler 

• Enhanced Timer1 - Dedicated low-power 32 kHz oscillator - 16-bit timer/counter with prescaler - External Gate Input mode with toggle and single shot modes - Interrupt-on-gate completion 

• Timer2, 4, 6: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler 

• Two Capture, Compare, PWM Modules (CCP) - 16-bit Capture, max. resolution 12.5 ns - 16-bit Compare, max. resolution 200 ns - 10-bit PWM, max. frequency 20 kHz 

• Three Enhanced Capture, Compare, PWM modules (ECCP) - Software selectable time-bases - Auto-shutdown and auto-restart - PWM steering • Master Synchronous Serial Port (SSP) with SPI and I2CTM with: - 7-bit address masking - SMBUS/PMBUSTM compatibility 

• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) - RS-232, RS 485 and LIN compatible - Auto-Baud Detect - Auto-wake-up on start

Peripheral Features (Continued): 

• SR Latch (555 Timer): - Multiple Set/Reset input options 

• Integrated LCD Controller: - Up to 96 segments - Variable clock input - Contrast control - Internal voltage reference selections 

• 2 Comparators: - Rail-to-rail inputs/outputs - Power mode control - Software enable hysteresis 

• Voltage Reference module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels - 5-bit rail-to-rail resistive DAC with positive and negative reference selection

Product Specification

Product Photos

For more product information, please download the PDF